INSTRUCTIONS for DOUBLE BED and SINGLE BED Installation

  1. After opening your package, place the waterproof covers on each of the foam inserts.
  2. For maximum protection, you may position the zipper on the outer side of the foam so that the zipper and seams are farthest away from any possible soiling.
  3. Put the fitted bed sheet on the mattress with the pockets closest to the headboard.
  4. Unzip the pockets.
  5. Insert 2 foam inserts into each pocket.
  6. Start in the middle of the zippered pocket opening (the widest opening) and guide the first piece all the way to the top of the pocket towards the headboard – flat side down.
  7. Insert the second piece by entering through the centre of the zippered pocket opening as well (the widest opening) and guide it towards the bottom of the pocket towards the footboard.
  8. Zip up the pockets.
  9. Repeat steps 5, 6, 7 and 8 for the other side.
  10. Ready to use.

INSTRUCTIONS for TODDLER BED Installation

  1. After opening your package, place the waterproof cover on the foam insert.
  2. For maximum protection, you may position the zipper on the outer side of the foam so that the zipper and seams are farthest away from any possible soiling.
  3. Put the fitted bed sheet on the mattress with the pocket closest to the exposed side of the bed.
  4. Unzip the pocket.
  5. Insert the foam into the pocket.
  6. Start in the middle of the zippered pocket opening(the widest opening) and guide the foam in-flat side down.
  7. Zip up the pocket.
  8. Ready to use.